Currently my drawers are occupied by flatware (drawer 1), cooking utensils (drawer 2) and kitchen towels, oven mitts and dish cloths (drawer 3). My utensil drawer is so full that I had to buy a large crock to place on the counter for my overflow. All of my baking utensils are sitting on a shelf in my baking cupboard taking up valuable cupboard space. I need more drawers!!!!!
Step 2 – Cutting
Taking your measurement, cut the yardstick using a miter box and handsaw.
Step 3 – Sanding and Painting
Sand the sticks to give them a smooth finish, concentrating on the end that you cut. Paint the sticks your desired color, being sure to paint the edges. I only painted one side of the stick because the other side was going to be attached to the cupboard. *I didn’t bother priming it because the wood was so porous.
Step 4 – Drilling & Measuring
Drill a pilot hole on both ends of the stick. This will keep the wood from splitting when you attach it to the cupboard door. Measure the center (length wise), this will be the line that you will place the hooks on.
Step 5 – Placement
This is important! Lay your cups out, on the stick, in the order that you want to display them in your cupboard. Now make sure that the first and last cup are not overlapping the end of the stick. If it is it will keep your cupboard door from shutting once it has been hung.
Step 6 – Positioning Hooks
Using a pencil, mark the position of each cup (or spoon) that you have laid out. Then drill a small pilot hole for the hook. Because the wood is so soft the pilot hole will keep the wood from splitting when you attach the hooks
Step 7 – Fastening
There are a couple of things that you need to keep in mind before you permanently attach the stick to your cupboard. () Be sure that the stick is placed below a shelf. If you place it at the same level as the shelf you won’t be able to close your cupboard door. (2) Center the stick on the cupboard door. If it’s not centered it will keep the door from shutting. (3) Use a level to mark the area that you want to attach the stick. Things just look sloppy and unfinished when their not level. (4) Pre-drill pilot holes in your cupboard door. If you don’t pre-drill you could cause permanent damage to your cupboard doors, making this cheap project an expensive one.
Step 8 – Hooks
Align the pilot hole on the stick with the one on your cupboard door. Attach using your wood screws. * Be sure that your wood screws are long enough to go through the stick but short enough to not go all the way through your cupboard doors. Once the stick is placed add your hooks to the pre-drilled pilot holes that we made earlier.
Step 9 – Enjoy
Pat yourself on the back for doing such a great job and for bringing a little more organization into your life.
This post has been featured on: